F10 Bluetooth

Re: F10 Bluetooth

detach8;836997 said:
My F10 bloody bluetooth and iDrive used to hang, but ever since I got MA to do a software upgrade it does not happen anymore. Maybe go get your software version checked. PI can go to those sponsors who retrofit the 10" iDrive.

what's the Integration level (I-Level) of your ride? Or did MA tell you what version ista/p they program the ride with?
 
Re: F10 Bluetooth

I use my hands free set that comes with my phone. Super clear
 
Re: F10 Bluetooth

Thanks for all the replies bro... paiseh... post already MIA for few days.

Ah Wing, u are indeed a unique person with unique problem.... hehe call Germany...

I will try Jacko method and download software. Wish me luck!
 
Wah... this upgrade sibeh simple leh. Test calls after upgrade allows calls to be answered on wheel! However, not sure if it I'd because I already answer a call earlier on phone. Will update further after more tests tmr.

No matter what, thanks Jacko... I really didn't know BMW will allow us to upgrade car software ourselves.
 
Re: F10 Bluetooth

MW;839469 said:
I use my hands free set that comes with my phone. Super clear

The white headphones with built in microphone that come with the iphone lagi clearer......
 
Re: F10 Bluetooth

This morning drove and tested... incoming calls still cannot receive from iPhone 4s... sianz
 
Yep tried my 2011 F10 HL phone button on steering cannot answer calls. This really dumb...having a button that doesn't work!
 
Re: F10 Bluetooth

clamsgp;840487 said:
. This really dumb...having a button that doesn't work!



"dump" is the word!!!

My E60 comes "Bluetooth Ready." But it still does not work. I was told I need to install a $2,500 module to get it to work.


By any English definitiion, what do you derive by the words "Bluetooth Ready"?


When somebody say.... Lunch Ready, or Meeting Ready or workshop call you to say Car Ready....
 
Re: F10 Bluetooth

st8800;840101 said:
This morning drove and tested... incoming calls still cannot receive from iPhone 4s... sianz

I also using a 4s with IOS 5.1.1 had no issue with the new updated firmware, was able to receive and made calls which i have being using it quite offen. :thumbsup:
 
Re: F10 Bluetooth

ferri;840632 said:
I also using a 4s with IOS 5.1.1 had no issue with the new updated firmware, was able to receive and made calls which i have being using it quite offen. :thumbsup:

And u are driving E60/F10 which month and year of manufacturing? Mine is also updated iPhone 4s 5.1.1.
 
Re: F10 Bluetooth

st8800;840640 said:
And u are driving E60/F10 which month and year of manufacturing? Mine is also updated iPhone 4s 5.1.1.

Mine is a F10 520 mfg date 10/11, update the firmware since i collect the car at End Feb 12.
 
Re: F10 Bluetooth

Hmm... perhaps they solve the issue with 520i. Mine is 523i. Thanks bro.
 
Re: F10 Bluetooth

st8800;840668 said:
Hmm... perhaps they solve the issue with 520i. Mine is 523i. Thanks bro.

Bro,

I don't think that's the issue cos I'm driving a January 2011 manufactured 528i and have been using my iphone 3GS and then the iphone 4S without any problems.

Start the car, 1 minute later all contacts are loaded into my idrive and the phone button on the wheel works like a charm. I even recorded some voice tags using the voice command button to call some of my more common calls.

Maybe can try to check the software and do a upgrade like the one suggested earlier?

:)
 
Re: F10 Bluetooth

Slayermarc;840749 said:
Bro,

I don't think that's the issue cos I'm driving a January 2011 manufactured 528i and have been using my iphone 3GS and then the iphone 4S without any problems.

Start the car, 1 minute later all contacts are loaded into my idrive and the phone button on the wheel works like a charm. I even recorded some voice tags using the voice command button to call some of my more common calls.

Maybe can try to check the software and do a upgrade like the one suggested earlier?

:)

Mmm...interesting. Mine is a Jul 2011 523i so should work as well. But I did interrupt the downloading of the contacts to iDrive so maybe that's the cause?
 
Re: F10 Bluetooth

My iPhone 4 (not 4S) works perfectly fine with my upgraded software version @ MA, driving 523i btw.
 
Re: F10 Bluetooth

jacko;837050 said:
Maybe can try to check the bluetooth software currently installed in the car and try to upgrade if appropriate.

when i collect my car(f10) the bluetooth software version are as follow, under iDRIVE, settings => software update :
Multimedia: MX-003.004.031
Telephone: TX-003.004.031

I downloaded the updated software from here, need the 7 digit vin:
BMW Bluetooth-Schnittstelle : Fahrzeugauswahl

The newer software version MX-3.5.4, and TX-3.5.4 has some improvement below. I do noticed the bluetooth connect faster with my iphone4s in my case:

> Office: Improved support for email messages.

> Telephone: Improved USB connectivity for
iPhones with iOS 5. Improved connection
setup with certain phones. Display and stability
with calls ongoing improved with certain
phones. Improved Bluetooth connectivity
with HTC phones. Improved phone
book sorting on Android phones in Japan.

> Multimedia: Improved display of additional
album and track information. Better connectivity
for Bluetooth audio devices.

Content of README:
http://www.bmw.com/_common/shared/owners/bluetooth/pdf/Readme_UPD01004_ENG.pdf

Size is about 6.6Mb download to root folder of the thumbdrive and insert into the USB centre console, then go to iDRIVE => settings => software update
it will select automatically the correct version to upgrade. upgrade takes about 3-5 minutes in my case.
updatingg.jpg


Sharing my experience.

cheerss.. and happy motoring... :wavey:

After update is it

Multimedia: MX-003.005.041
Telephone: TX-003.005.041?
 
Re: F10 Bluetooth

pReTeNd3r;841036 said:
After update is it

Multimedia: MX-003.005.041
Telephone: TX-003.005.041?

Hi bro, yes, in my case after update I get the above version.

Cheersss...
 
Re: F10 Bluetooth

jacko;841165 said:
Hi bro, yes, in my case after update I get the above version.

Cheersss...

After update, the TX is the same version. But my MX is older version.

How do I update the MX version?

:chinese:
 

Members online

No members online now.

Forum statistics

Threads
82,766
Messages
1,019,409
Members
78,670
Latest member
oxbett2com
Back
Top