WTS: 19" M3 220M Rims

[staloy]

Hi ,

Wheels came off an M3. The specs are as follows:

(front) 19x8.5 +29
(rear) 19x9.5 +23

(5x120 bolt pattern), comes with the original bolts with locking nut.

Wheels are off the car, cleaned and boxed up ....

Please PM offers.

Thanks

 

[Decaf]

Re: WTS: 19" M3 220M Rims

Bumps for a nice set of blings!

 

[atec1267]

Re: WTS: 19" M3 220M Rims

can it fit e90 320i

 

[wt_know]

Re: WTS: 19" M3 220M Rims

bumpz for a good set of rim ...
too bad the rear offset is too aggresive for non-m car

 

[staloy]

Re: WTS: 19" M3 220M Rims

can it fit e90 320i

Sorry bro, not for a 320.

i have seen it on a 335. but it will be slightly out at the rears.

Maybe some of the resident experts or those who have experience, can add value.

cheers

 

[staloy]

Re: WTS: 19" M3 220M Rims

can it fit e90 320i

interesting, i stand corrected.... having assumed it could not fit.

oem 19" m3 wheels on e90 335i - BMW 3-Series (E90 E92) Forum - E90Post.com

have a look at this thread. It has been fitted... Fender Roll, Run 225 or 235@ front & 255@ the rear

but i doubt you should run with just stock suspensions , will need something stiff :sneaky:

 

[Labit]

Re: WTS: 19" M3 220M Rims

Suspension at least medium type. If not, needs to use super hard spring.

Try to use Bridgestone rear 255 coz tyres edge more radius to avoid contact should u not roll the fender.

 

[staloy]

Re: WTS: 19" M3 220M Rims

Suspension at least medium type. If not, needs to use super hard spring.

Try to use Bridgestone rear 255 coz tyres edge more radius to avoid contact should u not roll the fender.

Thanks Bro, so with Bridgestone 255, no fender roll required... Good Info.

You have this set up too ?

 

[lscalan]

Re: WTS: 19" M3 220M Rims

How about f10 520? Can fit ?

 

[staloy]

Re: WTS: 19" M3 220M Rims

Hi, you asked a v gd qn.

I asked and was told that the offsets can fit an f10.

Gotta chk if it has been done:laughlik:

 

[wt_know]

Re: WTS: 19" M3 220M Rims

f10 share same offset with e90 (non-m) where flush setting is about 8.5J + 30 (front) and 9.5J +30 (rear)
might or might not need to roll fender, which depends on how wide is the tyre and square/round shape

i think the rear (+23) is still too aggresive for f10 ... 7mm closer to fender but those who like sibei aggresive can always do it by roll fender gao gao, use thinner tyre & round shape plus abit negative camber

 

[staloy]

Re: WTS: 19" M3 220M Rims

Thx Bro,

so looks like the story is the same as the E9X.

f10 share same offset with e90 (non-m) where flush setting is about 8.5J + 30 (front) and 9.5J +30 (rear)
might or might not need to roll fender, which depends on how wide is the tyre and square/round shape

i think the rear (+23) is still too aggresive for f10 ... 7mm closer to fender but those who like sibei aggresive can always do it by roll fender gao gao, use thinner tyre & round shape plus abit negative camber

 

[Garylin]

Re: WTS: 19" M3 220M Rims

will this fit E60?

 

[staloy]

Re: WTS: 19" M3 220M Rims

Bro,

It has been fitted before...chk below 8)

FS: 2011 OEM 19" 220M Wheels + PS2's - BMW E60 5-Series Forum | 5Post.com

Br

 

[Carat]

Re: WTS: 19" M3 220M Rims

Hi bros..need advice if can fit into z4??? :juggle:

 

[Red_Bean_Bun]

Re: WTS: 19" M3 220M Rims

Hi bros..need advice if can fit into z4??? :juggle:

E85 or e89 ?

 

[Carat]

Re: WTS: 19" M3 220M Rims

E85 or e89 ?

bro..2009 model; E89 rite?