Need Advise On The Followings :

[luciferz666]

1) Is E46 320CI & E46 M3 having the same PCD? Wat's the measurement?
2) Looking to buy DPE rims from USA, so do you guys know wats the offset suitable?
3) Thinking of getting 8.5" front & 9.5" back or 9" front & 10" back? Wat do you suggest?
Rgds,

 

[kenntona]

Re: Need Advise On The Followings :

1) Same, 120
2) Offset not disclosed. DPE, HRE, iForged all do not reveal their offset. On my rims, estimation is +35 F +32 R
3) Preference. Most will go for 8.5/9.5 setup, but you can go 9/10 as well. I am running 8/10 - 275 tyres on the rear. Do note that DPE does not usually take orders on half sizes, unless you wanna pay more.

 

[Jadis]

Re: Need Advise On The Followings :

1) Same, 120
2) Offset not disclosed. DPE, HRE, iForged all do not reveal their offset. On my rims, estimation is +35 F +32 R
3) Preference. Most will go for 8.5/9.5 setup, but you can go 9/10 as well. I am running 8/10 - 275 tyres on the rear. Do note that DPE does not usually take orders on half sizes, unless you wanna pay more.

Ken, your front wheel 8x19, do you put spacers? So the width of front and back wheels would be quite big different.

 

[Jadis]

Re: Need Advise On The Followings :

On DPE say 8x19 front and 9x 19 rear would cost about how much, how about lead time?

 

[tom_ting]

Re: Need Advise On The Followings :

contact Manu of DPE engineering, he will hook you up a good deal on the Signature Series.

Signature series is priced in the region of USD4000-4500 depending what finish you're after.

 

[Jadis]

Re: Need Advise On The Followings :

Thanks, will try to get more info from them.

 

[luciferz666]

Re: Need Advise On The Followings :

Oic, juz received email frm Manu & still waiting for him to reply wat kinds of rim width dats suits me? Think mostly I will take 9/10 measurements.
Thks guys!

1) Same, 120
2) Offset not disclosed. DPE, HRE, iForged all do not reveal their offset. On my rims, estimation is +35 F +32 R
3) Preference. Most will go for 8.5/9.5 setup, but you can go 9/10 as well. I am running 8/10 - 275 tyres on the rear. Do note that DPE does not usually take orders on half sizes, unless you wanna pay more.

 

[kenntona]

Re: Need Advise On The Followings :

Ken, your front wheel 8x19, do you put spacers? So the width of front and back wheels would be quite big different.

No need. I am running fat tyres at the rear.

On DPE say 8x19 front and 9x 19 rear would cost about how much, how about lead time?

Depending on design. Check with them.

Oic, juz received email frm Manu & still waiting for him to reply wat kinds of rim width dats suits me? Think mostly I will take 9/10 measurements.
Thks guys!

8/9 or 9/10 both fine. Check with him on shipments. Few forumers ordered DPEs at the same time, so perhaps you could amalgamate the shipments together. You can quote me Kenneth.

 

[luciferz666]

Re: Need Advise On The Followings :

Hmm, but I do not know who ordered? Maybe will also ask Manu at the same time when confirming my orders.
Rgds

QUOTE=kenntona;276418]1) Same, 120
2) Offset not disclosed. DPE, HRE, iForged all do not reveal their offset. On my rims, estimation is +35 F +32 R
3) Preference. Most will go for 8.5/9.5 setup, but you can go 9/10 as well. I am running 8/10 - 275 tyres on the rear. Do note that DPE does not usually take orders on half sizes, unless you wanna pay more.[/QUOTE]