f12/f13 640i tuning

[SAMLAMBO]

Re: f12/f13 640i tuning

Anyone doing the Kelleners?

 

[wobbles]

Re: f12/f13 640i tuning

Anyone doing the Kelleners?

I'm quite keen. Trying to decide between this and the Swisstech Chip thingee.

Neither seem to have any Dyno results to back their claims though - at least not to my knowledge

 

[SAMLAMBO]

Re: f12/f13 640i tuning

I'm quite keen. Trying to decide between this and the Swisstech Chip thingee.

Neither seem to have any Dyno results to back their claims though - at least not to my knowledge

both companies seem reputable, why not any dyno sheets? It sure would help.

 

[SAMLAMBO]

Re: f12/f13 640i tuning

I've been doing a lot of reading on the Kelleners tuning and I am most probably going with Kelleners based on it's experience and tuning history. Also a lot in euro/usa using this product with no issues and power gains.
History,
Link: Ralf Kelleners

Also you'll can email me for the dyno chart(F13) which reads out at 384bhp, 0-100 in 4.9secs. The file is to big to put in here. Manage to find the dyno charts over the net.
[email protected]

 

[omshks]

Re: f12/f13 640i tuning

Wobbles, drumminz and myself will be gg with swiss chiptech... a fellow bro has tried it on his n 20 engine and gave quite good reviews on it... we meeting up tomorrow evening at coco world to make deposit payment... if u keen, can meet us there at 545pm...

 

[SAMLAMBO]

Re: f12/f13 640i tuning

Wobbles, drumminz and myself will be gg with swiss chiptech... a fellow bro has tried it on his n 20 engine and gave quite good reviews on it... we meeting up tomorrow evening at coco world to make deposit payment... if u keen, can meet us there at 545pm...

Thanks, will see how my day goes

 

[wobbles]

Re: f12/f13 640i tuning

Thanks bro OMSHKS for helping me put in the payment for the Swiss Chiptech. The offer came with a Dyno run, so I'm keen to give it a go. At worse, I'll take out the chip on the spot & warn all the bros here, if the post-chipping Dyno shows no discernable improvement hehehehe.

Only thing I'm not sure about is whether the offer of the Dyno is a "before" & "after" or, only the "after". If it's just the one run, then I reckon I should offer my slot for either bro OMSHKS or Bro Drumminz to do a before, and then, the same car goes for the after... Or, vice versa, whichever works.

What do Bros OMSHKS & Drumminz think?

 

[jasonmaxima]

Re: f12/f13 640i tuning

I hope your fuel consumption gets thrown out the window cos you'll be so addicted to the improvement in torque......

 

[SAMLAMBO]

Re: f12/f13 640i tuning

Looking forward to your power gains! Please post dyno charts if any. I am going with Kelleners for sure. Going to drop by their place later around 3 plus.

 

[wobbles]

Re: f12/f13 640i tuning

I hope your fuel consumption gets thrown out the window cos you'll be so addicted to the improvement in torque......

HA! Who's got something like 700Nm of torque spinning his Awesome Monster Getaway-wagon's 2 back wheels?

I hope the fuel pump prices go up to $5/litre for you....

 

[wobbles]

Re: f12/f13 640i tuning

Looking forward to your power gains! Please post dyno charts if any. I am going with Kelleners for sure. Going to drop by their place later around 3 plus.

Yup... we'll exchange Dyno charts eh?!

 

[omshks]

Re: f12/f13 640i tuning

Bro wobbles ... will check with zane if dyno includes before and after chip installation... if not then I am ok with your suggestion... but our chip needs to be flown in...so I guess bro samlambo will have his power chip in first as I think J4C has stock for N55...

 

[wobbles]

Re: f12/f13 640i tuning

Bro wobbles ... will check with zane if dyno includes before and after chip installation... if not then I am ok with your suggestion... but our chip needs to be flown in...so I guess bro samlambo will have his power chip in first as I think J4C has stock for N55...

Excellent! Excellent!

As a learned man of science (ahem), facts, not fantasy, not fiction - but cold hard, irrefutable facts - are important to me.

So, if I'm paying for a chip, I wanna make sure I get what's promised (or at least close to it). No point putting something in to make me feel any longer/thicker/bigger than what I'm not

Dyno b4 & Dyno after would be best

 

[SAMLAMBO]

Re: f12/f13 640i tuning

J4C will have the stock tomorrow and I am off to KL tonight so will do it next week, also still running in my engine.

 

[wobbles]

Re: f12/f13 640i tuning

Yeah, I'm waiting for my 2000km servicing to be done & dusted before the chip goes in...

Have a good flight to KL!

 

[SAMLAMBO]

Re: f12/f13 640i tuning

Yeah, I'm waiting for my 2000km servicing to be done & dusted before the chip goes in...

Have a good flight to KL!

Thanks! Don't forget to update here!

 

[wobbles]

Re: f12/f13 640i tuning

I will most definitely update when it happens!

The 6er folder became SO MUCH LIVELIER ever since YOU joined the camp mate!

 

[SAMLAMBO]

Re: f12/f13 640i tuning

I will most definitely update when it happens!

The 6er folder became SO MUCH LIVELIER ever since YOU joined the camp mate!

Maybe we need more action here, hahaha

 

[spursburger]

Re: f12/f13 640i tuning

how much are both products? I have been busy with work and had no time to do anything to my F13. Also bought a 320i F30 for my wife so was wondering if they have a program for it too.

 

[wobbles]

Re: f12/f13 640i tuning

how much are both products? I have been busy with work and had no time to do anything to my F13. Also bought a 320i F30 for my wife so was wondering if they have a program for it too.

I think the Kellener's double that of the Swiss Chiptech - but the Kellener's version claims a higher hp & Nm IIRC. Ultimately, I thought I'd give the more affordable option a try first - got poisoned by bros OMSHKS & drumminz ... the more the merrier mah