Dented and scratched rear right wheel arch

soong.wei.sin@gmail.com

Well-Known Member
Hi,

Really bad day today, was at Adelphi carpark when the above happened. While turning right, I misjudged the turning angle and the back of my 2008 525i hit the wall.

Anyone had similar bodywork done, with good results could u let me know the workshop pls. Or does PML do a better job at a reasonable price?

Tks.
 
Last edited by a moderator:
Re: Dented and scratched rear right wheel arch

soong.wei.sin@gmail.com;617118 said:
Hi,

Really bad day today, was at Adelphi carpark when the above happened. While turning right, I misjudged the turning angle and the back of my 2008 525i hit the wall.

Anyone had similar bodywork done, with good results could u let me know the workshop pls. Or does PML do a better job at a reasonable price?

Tks.

PML dun do bodywork, they also sub out to other bodypaint workshops.
and sure kena chop left, right, centre, inside out if send to PML.

try the usual suspects, Sin Wee Chuan, Yew Lip etc.
Just do a google and u should get their address easily.

good luck, buddy.
 
Re: Dented and scratched rear right wheel arch

:shakehea:
soong.wei.sin@gmail.com;617118 said:
Hi,

Really bad day today, was at Adelphi carpark when the above happened. While turning right, I misjudged the turning angle and the back of my 2008 525i hit the wall.

Anyone had similar bodywork done, with good results could u let me know the workshop pls. Or does PML do a better job at a reasonable price?

Tks.

Same thing happened to my F10 523i some time back. Right rear fender grazed the wall when wife was exiting the Novena Square carpark after her manicure session.:shakehea:

I sent the car to TSW @ Sin Ming Autocentre the following day. Knocking back the dent in the rear fender + paint work + respraying of 2 rear wheels (19" Breyton RaceGTS) cost me about $500+. Paint finish and colour matching was top notch and the 2 rear wheels looked like brand new. :thumbsup:
 
Re: Dented and scratched rear right wheel arch

Hi all,
Sent car to swc on monday morning just got it back last night. Quality of the panel beating and painting very good. The bends of the wheel arch look like they were never dented before and the paintwork is very smooth no uneven areas.
Damage is about $600+.
Tks again.
 

Latest posts

Members online

No members online now.

Forum statistics

Threads
82,762
Messages
1,019,393
Members
78,670
Latest member
oxbett2com

Latest posts

Back
Top