This Beemer belongs to KW who does his own detailing once a while but given his hectic schedule, we were tasked to take care of his beloved. The car was given a thorough wash to remove dirt and to prevent instilling swirl during the machine polishing process. After that, the surfaces were clayed to remove above surface contaminants. Next, the car was blow dry and taped off for the next process.
The car has moderate swirls and water etched marks and was machine polish with the following steps and products
Menzerna Power GLoss/cutting pad on a rotary
Menzerna Intensive Polish/polishing pad on a DA
Menzerna Final Polish/polishing pad on a DA
And sealed with
Meguiar's NXT wax applied by hand
Meguiar #16
Taped areas before machine polishing
Some before and after pictures of swirls on the bonnet
Full shot of car
Leaves on bonnet
Buildings on roof
Side Reflection
Bottom up view
And finally.........
The Badge
Thank you for viewing :woottt:
The car has moderate swirls and water etched marks and was machine polish with the following steps and products
Menzerna Power GLoss/cutting pad on a rotary
Menzerna Intensive Polish/polishing pad on a DA
Menzerna Final Polish/polishing pad on a DA
And sealed with
Meguiar's NXT wax applied by hand
Meguiar #16
Taped areas before machine polishing
Some before and after pictures of swirls on the bonnet
Full shot of car
Leaves on bonnet
Buildings on roof
Side Reflection
Bottom up view
And finally.........
The Badge
Thank you for viewing :woottt: